Re: The Question about the Shop | <– Date –> <– Thread –> |
From: Stuart Staniford-Chen (stanifor![]() |
|
Date: Wed, 15 Nov 1995 14:02:42 -0600 |
Calvin Smith writes: >I would like to ask for readers of this list who are interested to outline > for me and my committee their experiences in developing a workshop, and the > general layout of the shop itself, and how it worked out after it was set > up and in use. I developed and run our woodshop at N St Cohousing which we have had for about five years. It's a 13'x21' space devoted entirely to woodwork. We have a table saw,band saw, chop saw, jointer, thickness planer, as well as a nice workbench and a pretty good complement of hand and power tools. Just about all the tools and furniture are on wheels and that is necessary in our smallish space. If I count the days on which someone is in the shop for a significant length of time (more than 15 minutes say), it's probably Me: 50-100 days/year Everyone else: 10-30 days/year The important issue is this -- count the number of people who are *really* passionate about the activity in question; those are the folks who will put most of the miles on the shop. Our shop does get used a lot for people cutting a shelf to length, or cutting a piece of trim for their house, etc. One of our members is now contemplating building a new set of kitchen cabinets in there which would create a lot more use of the shop. (I suppose this is less likely in a new development though). As to workshop layout - I'm not sure there is too much that I can say which is specific to a cohousing workshop. The classic book on the subject for woodshops is Scott Landis, "The Workshop Book" (his "The Workbench Book" is also very good). As to combining functions like auto repair and woodworking - I'd say you need dividers in the shop. Even with a dust collection system, power woodworking tends to coat the place in sawdust - no fun on your partially disassembled carburretor. Use of power tools also makes it tough for two people to work in the same space because of noise issues. Stuart =================================================================== Stuart Staniford-Chen | Dept of Computer Science stanifor [at] cs.ucdavis.edu | UC Davis, CA 95616 h:(916) 756-8697; w:(916) 754-8742 | and http://seclab.cs.ucdavis.edu/~stanifor/ | N St Cohousing Community ====================================================================
-
The Question about the Shop Snow Lion Publications, November 14 1995
- RE: The Question about the Shop Rob Sandelin (Exchange), November 15 1995
- Re: The Question about the Shop Stuart Staniford-Chen, November 15 1995
Results generated by Tiger Technologies Web hosting using MHonArc.